Industrial model featuring interactive illumination.

Although we specialise in architectural models we also regularly produce high quality industrial models such as this model of a Cryobattery power station which incorporates interactive LED illumination. The CryoBattery system uses renewable sources to compress air in tanks which can later be used to generate power. In effect, it acts as large battery to store energy for when it is most needed. This is very much a stylised representation of the facility with the strong colours being used to indicate different parts of the process. The LED illumination rises slowly upwards to the top of the vessels and then gradually drops down again to represent the “filling up” and “emptying” phases of the CryoBattery facility.

Set of 7 models shipped in Pelicases.

The client for this project initially had the models 3D printed but quickly realised that the quality of finish wasn’t good enough for their requirements so they decided to contact us for help. They wanted to use the models for marketing purposes so it was important the technical spec and level of finish reflected the high quality of their product. We designed the models in three parts that could be easily slotted together including two interchangeable options for the top section. The rotors were able to be freely turned and we recreated the yaw action which allows the turbine assembly to turn and face the direction of the wind. We also added the reflective solar panels shown on top of the wind deflectors and finished the models in the specified white RAL colour. We then provided a Pelicase with tailored foam inserts for each of the 7 models which you can see in one of the photos above.

Three models of 5000 year old tombs.

We’ve just completed these three very different types of architectural models – they’re different because the architecture they represent is over 5000 years old. The Maghera Heritage Centre in Northern Ireland commissioned us to create these unusual models of three local megalithic tomb structures. It was a technically challenging project because it was important that the stones were accurately shaped and positioned and had a realistic looking finish. We also had to make sure that the landscaped setting looked convincing and didn’t detract from the realistic appearance of the stones. The client was very pleased with the finished models and it was very enjoyable for us to apply our architectural model making skills to some very different types of man-made structures.

White styled model to show proposed new development area.

We’ve worked with several different county councils across the UK but, as you’d expect, we’ve done a lot of work for our local county council and this master plan model is our latest project for them. Commissioned as a part of public consultation process one of the major purposes of the model is to demonstrate the scale and extent of a proposed major redevelopment of the area, including a new Arena venue for concerts and events. Although it’s hard to pick up in these photos, the existing on-site buildings are shown in light grey and the proposed new buildings are shown in white. The model also incorporates LED illumination which is used to highlight some of the key proposals.

Roof-off view to show new machinery layout.

This model was commissioned to illustrate the proposed new factory layout for a precision engineering company serving the aerospace industry. The model was to be used initially for evaluation purposes prior to finalising plans but had a secondary function as on-going staff-training tool. To keep costs down the level of detail on the machinery was kept to a stylised level but the individual machines also needed to be instantly recognisable to their highly skilled workforce. The colour coding was added to help clarify zones of operation. The upper floor of the offices and the mezzanine level in the production area were both made as removable elements to facilitate a clear view of the ground floor layout.

Our Latest Projects | Modelmakers | Architectural Models

Fourth model this year for national developer.

One of the UK’s largest housing developers has come back to us again for a 4th sales model this year. They’ve been coming to us for many years for their sales models because of the consistent high quality and value we deliver every time. This model was particularly challenging because of the steep topography of the site which meant that virtually every plot was on a different level. As a sales tool it was important that we accurately modelled every step, retaining wall and embankment across the site so that purchasers could easily understand the levels and contours around whichever house they were looking to buy.

Third project this year for South of England developer.

As with the previous post, this is one of three sales models we’ve produced this year for another of our regular clients who keep coming back to us for high quality sales models for their marketing suites. This model was at 1:150 scale which is the ideal scale option for smaller housing developments. Larger developments typically need to be at 1:200 scale or even 1:250 scale just to keep the model base to a manageable size. We were planning to post photos of all three projects this month but two of the almost completed models have gone on hold at the last minute due to some late design changes on site. It’s probably going to be a couple of months before the other two models can be fully completed but hopefully we’ll be able to post finished pics towards the end of this year.

Third sales model this year for major UK house builder.

This is the third sales model we’ve produced this year for one of the UK’s biggest housing developers. We’ve been supplying high quality sales models for their marketing suites for over 12 years and have another very large project for them booked in later this year. An important feature of this site was the sloping topography which had to be very precisely modelled so that the gardens with retaining walls and steps could be accurately represented. If you click on the right inset pic above you can see a close up example of these level changes.

Topographical landscape model.

Featuring the site of a gas-fired power station on the Pembrokeshire coast, this large topographical model was built at 1:1000 scale which is an ideal scale option for a large spread-out site. At this scale 1 millimetre represents 1 metre so a 2Km long site fits onto a 2m long base which is big but still manageable, as long as you have space in your marketing suite. Even though the scale is small it still allows us to show a recognizable level of detail for any important buildings whilst any surrounding context buildings can be shown as massing blocks which helps to keep costs down.

Sales models for two housing developers.

Earlier this month we delivered two housing models to different developers on the same day. We’d actually finished both models a few weeks earlier but neither client had their marketing suite set up so they asked us to store the models until they were ready on site. Both marketing suites were completed in early August and, whilst we deliver projects all over the UK, on this occasion the sites were less than 40 miles apart so it made sense to deliver them on the same day. We produce at least a dozen of these residential sales models every year alongside industrial and display models of all types for a variety of different marketing requirements.

Our Latest Projects | Modelmakers | Dublin Apartment Development – 1:150 Scale

Fully detailed sales model exported to Ireland.

“The model looks amazing. You and your team should be really proud, certainly exceeding our expectations.” This was the response from the client on receiving the first photos of the finished model. The client was just as pleased when the model actually arrived in their offices in Dublin and very quickly confirmed a new order for a model of one of their other developments which we will start working on next month. It’s fair to say we were really proud with how this model came together, particularly as we had to work in a different way to comply with socially distanced working. This involved a mix of working from home and staggered shifts so that we were able to maintain a 2m distance in the workshop. We are also very used to working with masks so when necessary we were able to have more than one person working round the model at the same time.

Comments are closed