Fourth model this year for national developer.

One of the UK’s largest housing developers has come back to us again for a 4th sales model this year. They’ve been coming to us for many years for their sales models because of the consistent high quality and value we deliver every time. This model was particularly challenging because of the steep topography of the site which meant that virtually every plot was on a different level. As a sales tool it was important that we accurately modelled every step, retaining wall and embankment across the site so that purchasers could easily understand the levels and contours around whichever house they were looking to buy.

2.5m high models of Communications Masts.

We recently completed this pair of 2.5m high models of ships communications masts for use at DSEI, the premier UK defence Industry event. The masts, one for Port side, one for Starboard, were designed in sections that could be packed into a flight case for shipping and then be easily assembled at the venue. The design also included an extendable aluminium tube to give added strength to the masts’ main structural core. The main photo above shows the models on stand at this year’s event.

Third project this year for South of England developer.

As with the previous post, this is one of three sales models we’ve produced this year for another of our regular clients who keep coming back to us for high quality sales models for their marketing suites. This model was at 1:150 scale which is the ideal scale option for smaller housing developments. Larger developments typically need to be at 1:200 scale or even 1:250 scale just to keep the model base to a manageable size. We were planning to post photos of all three projects this month but two of the almost completed models have gone on hold at the last minute due to some late design changes on site. It’s probably going to be a couple of months before the other two models can be fully completed but hopefully we’ll be able to post finished pics towards the end of this year.

Third sales model this year for major UK house builder.

This is the third sales model we’ve produced this year for one of the UK’s biggest housing developers. We’ve been supplying high quality sales models for their marketing suites for over 12 years and have another very large project for them booked in later this year. An important feature of this site was the sloping topography which had to be very precisely modelled so that the gardens with retaining walls and steps could be accurately represented. If you click on the right inset pic above you can see a close up example of these level changes.

2.2 metre high model of navigation buoy.

A company that produces and maintains navigation buoys around Britain’s coastlines asked us to produce this quarter scale model of one of their standard buoys for use at exhibition events. At 2.2m tall it had to be made in sections that could be packed in flight cases for shipping but that could be easily assembled on site. If you click on the main photo above you can see the full extent of the model. To add some extra visual interest we came up with the idea of mounting it on a clear Perspex tube to give the impression that it was floating.

Our Latest Projects | Modelmakers | Perspex Commemorative Plaque - February 2007

Perspex Commemorative Plaque

This laser cut and engraved Perspex plaque was designed and made in the space of a few days. It was used as part of a PR photo opportunity at a “Topping Out” ceremony for a new international swimming pool. It was made from 10mm thick Perspex and fixed to a slate grey back board.

Comments are closed
Our Latest Projects | Modelmakers |

New client commissions first sales model.

After a run of industrial models we were happy to return to our roots with an architectural sales model for a nationwide house builder. This project was for their upmarket division who hadn’t traditionally used sales models in their marketing suites but wanted to “give it a try” for this compact development of detached executive homes in the north of England. Time will tell but hopefully they’ll discover, like our regular housing clients, what an effective sales tool these models can be and will come back to us for further models in the not too distant future.

Second model this year for the subsea industry.

Last month we produced a life-size model of an offshore mooring component and we’ve followed that up this month with another “under water” project, a 1:8 scale model of a seabed scanning machine that locates unexploded ordnance on the sea floor. This was a technically complex project because it had to include a movable boom arm and a traversing gantry linked to two belt and cog mechanisms on opposite sides of the main structure. The model was set on a sloping seabed to demonstrate the self levelling legs that were a major feature of this sophisticated piece of equipment.

Industrial Model For The Offshore Mooring Market.

When we were commissioned to produce this 2.2m high display model of a mooring component for the offshore wind turbine industry, the client’s overriding brief was to keep it as light as possible to make their lives easier when transporting it overseas to exhibition events. They also wanted it to fit into two compact, flight cases, including the stand, so it could shipped as “extra luggage” on flights. Our solution was to use vac-formed plastic shells for the main body of the model and hollow box construction for the yellow end sections which kept the overall weight under 20Kg. To split the model between the two flight cases we designed it in four main sections that could be easily assembled on site. We then designed a stand that could be “flat-packed” into the flight cases but was also easy to assemble on site.

Ancient monument laser-cut and engraved from solid Ash wood.

This small scale, stylised architectural model was commissioned as part of a test project for a new educational play scheme for young children. The client wanted a simplified representation of this ancient monument in a pale coloured wood so we suggested laser cutting and engraving out of solid ash would be a suitable option. The main photo shows the 800mm long model photoshopped into a desert setting which is the context it will be used in. The smaller photos show the two sides of the model and a close up detail. You can click on the photos to enlarge them.

Educational models for two different clients.

We’ve produced a few house section models, or what might be termed “dolls house” models, over the last few years but they don’t come up very often so it was quite a coincidence when two unrelated clients ordered these very similar models within a few weeks of each other towards the end of last year. Both models were to be used as educational aids; one for a London based university and the other for a South coast county council. We delivered the models earlier this month and both clients were delighted with the finished results.